Document ID: 10343 | |
Downloads5-in-1 EIA/TIA-449 Assembly and Pinouts Related DocumentsMore... Related Products/Technology
Related Discussion |
Introduction
This document displays the 5-in-1 EIA/TIA-449 cable assembly and describes its cable pin connections.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
EIA/TIA-449 Cable Assembly
EIA/TIA-449 DTE Cable Pinouts (DB-60 to DB-37)
|
60 Pin1 |
Signal |
Description |
Direction |
37 Pin |
Signal |
|---|---|---|---|---|---|
|
J1-49 J1-48 |
MODE_1 GND |
-- |
-- |
-- |
|
|
J1-51 J1-52 |
GND MODE_DCE |
Shorting Group |
-- |
-- |
-- |
|
J1-46 |
Shield_GND |
Single |
-- |
J2-1 |
Shield GND |
|
J1-11 J1-12 |
TxD/RxD+ TxD/RxD-- |
Twisted pair no. 6 |
==> ==> |
J2-4 J2-22 |
SD+ SD-- |
|
J1-24 J1-23 |
TxC/RxC+ TxC/RxC-- |
Twisted pair no. 9 |
<== <== |
J2-5 J2-23 |
ST+ ST-- |
|
J1-28 J1-27 |
RxD/TxD+ RxD/TxD-- |
Twisted pair no. 11 |
<== <== |
J2-6 J2-24 |
RD+ RD-- |
|
J1-9 J1-10 |
RTS/CTS+ RTS/CTS-- |
Twisted pair no. 5 |
==> ==> |
J2-7 J2-25 |
RS+ RS-- |
|
J-26 J1-25 |
RxC/TxCE+ RxC/TxCE-- |
Twisted pair no. 10 |
<== <== |
J2-8 J2-26 |
RT+ RT- |
|
J1-1 J1-2 |
CTS/RTS+ CTS/RTS-- |
Twisted pair no. 1 |
<== <== |
J2-9 J2-27 |
CS+ CS-- |
|
J1-44 J1-45 |
LL/DCD Circuit_GND |
Twisted pair no. 12 |
==> -- |
J2-10 J2-37 |
LL CS |
|
J1-3 J1-4 |
DSR/DTR+ DSR/DTR-- |
Twisted pair no. 2 |
<== <== |
J2-11 J2-29 |
DM+ DM-- |
|
J1-7 J1-8 |
DTR/DSR+ DTR/DSR-- |
Twisted pair no. 4 |
==> ==> |
J2-12 J2-30 |
TR+ TR-- |
|
J1-5 J1-6 |
DCD/DCD+ DCD/DCD-- |
Twisted pair no. 3 |
<== <== |
J2-13 J2-31 |
RR+ RR- |
|
J1-13 J1-14 |
TxCE/TxC+ TxCE/TxC-- |
Twisted pair no. 7 |
==> ==> |
J2-17 J2-35 |
TT+ TT- |
|
J1-15 J1-16 |
Circuit_GND Circuit_GND |
Twisted pair no. 9 |
-- -- |
J2-19 J2-20 |
SG RC |
1 Any pin not referenced is not connected.
EIA/TIA-449 DCE Cable Pinouts (DB-60 to DB-37)
|
60 Pin 1 |
Signal |
Description |
Direction |
37 Pin |
Signal |
|---|---|---|---|---|---|
|
J1-49 J1-48 |
MODE_1 GND |
Shorting Group |
-- |
-- |
-- |
|
J1-46 |
Shield_GNC |
Single |
-- |
J2-1 |
Shield GND |
|
J1-28 J1-27 |
RxD/TxD+ RxD/TxD-- |
Twisted pair no. 11 |
<== <== |
J2-4 J2-22 |
SD+ SD-- |
|
J1-13 J1-14 |
TxCE/TxC+ TxCE/TxC-- |
Twisted pair no. 7 |
==> ==> |
J2-5 J2-23 |
ST+ ST-- |
|
J1-11 J1-12 |
TxD/RxD+ TxD/RxD-- |
Twisted pair no. 6 |
==> ==> |
J2-6 J2-24 |
RD+ RD-- |
|
J1-1 J1-2 |
CTS/RTS+ CTS/RTS-- |
Twisted pair no. 1 |
<== <== |
J2-7 J2-25 |
RS+ RS-- |
|
J1-24 J1-23 |
TxC/RxC+ TxC/RxC-- |
Twisted pair no. 9 |
==> ==> |
J2-8 J2-26 |
RT+ RT-- |
|
J1-9 J1-10 |
RTS/CTS+ RTS/CTS-- |
Twisted pair no. 5 |
==> ==> |
J2-9 J2-27 |
CS+ CS-- |
|
J1-29 J1-30 |
NIL/LL Circuit_GND |
Twisted pair no. 12 |
==> -- |
J2-10 J2-37 |
LL SC |
|
J1-3 J1-4 |
DTR/DSR+ DTR/DSR-- |
Twisted pair no. 4 |
==> ==> |
J2-11 J2-29 |
DM+ DM-- |
|
J1-3 J1-4 |
DSR/DTR+ DSR/DTR-- |
Twisted pair no. 2 |
<== <== |
J2-12 J2-30 |
TR+ TR-- |
|
J1-5 J1-6 |
DCD/DCD+ DCD/DCD-- |
Twisted pair no. 3 |
==> ==> |
J2-13 J2-31 |
RR+ RR-- |
|
J1-26 J1-25 |
RxC/TxCE+ RxC/TxCE-- |
Twisted pair no. 10 |
<== <== |
J2-17 J2-35 |
TT+ TT- |
|
J1-15 J1-16 |
Circuit_GND Circuit_GND |
Twisted pair no. 8 |
-- -- |
J2-19 J2-20 |
SG RC |
1 Any pin not referenced is not connected.
Cisco Support Community - Featured Conversations
Related Information
| Updated: Aug 01, 2006 | Document ID: 10343 |